Fluidization fabrics is the device that supports the material and makes the air even permeate and flow thematerial.Therefore,the holes of the gas fluidization fabric should be dense, uniform and continuous, so that the material can be fluidized evenly, and the vortex phenomenon can be avoided, and the pore diameter of the orifice plate is smaller than that of the conveying material.If the air pressure drop through the hole plate is slightly larger than the air flowing through the orifice on the material layer is not completely drop,material fluidization, which greatly reduce the transmission capacity of air activatedgravityconveyor.
The surface of surface of the fluidization fabric should be smooth, with certain moisture resistance, heat resistance and mechanical strength. The common fluidization fabric has ceramic porous plate, cement perforated plate and fiber fabric, etc., which can be selected according to the specific circumstances, and now the chemical fiber fabric is used to make the breathable layer. should be smooth, with certain moisture resistance, heat resistance and mechanical strength. The common gas permeable layer has ceramic porous plate,cement perforated plate and fiber fabric, etc., which can be selected according to the specific circumstances, and now the chemical fiber fabric is used to make the breathable layer.When assembling, the fluidifying fabric should be tensioned, and the length and width should be properly kept.
